News

　　Water mist in car headlights can be dealt with as follows: turn on the headlights to evaporate naturally, expose them to the sun, blow them with a high-pressure water gun, replace the headlight shades, blow with a hair dryer, replace the sealing strips of the headlights, put in dehumidifier, add a cooling fan, Replace headlights. 　　Turn on the headlights to evaporate naturally:...

　　To solve the problem of car headlight astigmatism to focus the light, you first need to use a screwdriver to adjust the screw rod behind the light holder to change the beam direction of the headlight until it reaches the ideal focusing position. Next, we need to understand the specific reasons why car headlights scatter and do not focus light so that...

　　The adjustment of headlight focus is an important task in vehicle maintenance, which ensures the safety and clarity of vision during night driving. By adjusting the adjustment knob on the back of the headlight, we can change the position of the light to achieve the effect of adjusting the spotlight. It should be noted that the headlight adjustment methods and tools may...

　　Car rear bumpers are generally made of plastic material. This material is usually polypropylene plastic, which is lightweight and easy to manufacture. 　　In addition to the protective function, the front and rear bumpers of the car also need to be harmonious and unified with the body shape and pursue lightweight. Polypropylene plastic has the advantages of being easy to manufacture and matching...

　　1. When the vehicle or driver is stressed in a collision, the car bumper absorbs and moderates the external impact force, creating a buffer device to protect people and the car. 　　2. Car bumpers are safety devices that absorb and moderate external impact and protect the front and rear of the car body. With the development of the automobile industry, automobile bumpers,...

　　Commonly used materials for car bumpers include: 　　1. Plastic bumpers are composed of three parts: outer panels, buffer materials and cross beams. The outer panels and buffer materials are made of plastic, and the cross beams are stamped from cold-rolled thin plates to form U-shaped grooves. 　　2. The outer panels and buffer materials are attached to the cross beams. The plastic used...